********* ********* ********* ********* fluid ********* & ********* ********* is an ********* of disc ce*ifuge ********* in the ********* field as well as a co*ol ********* of ********* the ********* ********* of ********* fluid ********* the ********* ********* *********. Based on the fluid ce*ifuge *********, ********* disc set was used to ********* a ********* and ********* ********* ********* the gr*ity ********* of co*ition not fused with each other under the ********* of ce*ifuge field. At the ********* of ********* a ********* ce*ifuge of “*********”, there’s no ********* *********, *********, it can ********* the ********* cost for *********, s*e the *********, ********* the *********, and thus ********* an ********* ********* *********. 技术运用： 工业流体碟片式净化机对整机结构的设计进行了大量的优化设计，大幅提高了污油和金属颗粒的分离速度和效果，而且污油中水含量低于0.5%，完全可以作为废油料有偿销售给废品公司进行处理再利用，实现了零排放。
********* ********* The whole ********* ********* of ********* fluid disc ********* ********* has been ********* a lot, which ********* ********* the ce*ifuge speed and ********* of dirty oil and metal *********. What’s more, the water ********* in the dirty oil is less than 0.5%, which can be ********* as waste oil and sell to waste ********* for ********* and *********, and ********* to ********* a zero *********. Use a disc ********* ********* to make *********, *********, and ********* of ********* fluid and ********* fluid can ********* a ********* ********* for ********* and *********, which is ********* as the most ideal water ********* ********* *********. 技术参数: 净化分离后达到的标准 一次过滤的分离效率99%以上 杂质分离精度2um 浮油含量控制范 ≤ 0.5% 杂油含水率 <0.5% 霉菌*率达99%以上 ********* ********* ********* after being ********* and ********* The ********* ********* of one time ********* is ﹥ 99% ********* ********* ********* is 2um Oil slick ********* co*ol scope is ≤ 0.5% Water ********* of tramp oil is < 0.5% Mould ********* rate is over 99% 达到的效果： 1、实现切削液，浮油，金属颗粒三项分离，资源回收再利用。
2、切削液只需添加，无需更换，降低更换新液购买成本。
3、分出的杂油浓度高，可做废油料处理，增加收益。
4、切削液洁净，减少切削刀具的更换成本。
5、切削液洁净，不产生霉菌，车间空气不臭，有利于员工身心健康。
6、切削液洁净，产品质量提高，不良率下降，避免产品表面出现毛刺，划伤，增加产品表面光泽度。
7、切削液油浮油去除，减低粘连，免去加工后在清洗，增加成本。
8、切削液清洁，减少停工，提高生产效率。
9、循环使用，零排放，无排放污染物成本，环保。
*********： 1. ********* of ********* fluid, tramp oil and metal ********* as well as ********* of ********* can be *********. 2. The ********* fluid can be added ********* of *********, which can ********* ********* the cost of ********* new fluid. 3. The tramp oil ********* is at high conce*ation, which can be ********* as waste oil and the ********* can be ********* *********. 4. The cost of ********* ********* tool can be ********* due to the ********* fluid is very clean. 5. Mould will not come out as the ********* fluid is clean, which is ********* to *********’ *********. 6. The ********* ********* can be ********* and the ********* rate can be ********* ********* of the clean ********* fluid, which can *oid burrs and *********, and thus ********* the ********* of part *********. 7. As the tramp oil can be *********, and ********* can be *********, there is no need to clean the ********* again after *********, which can ********* the ********* cost *********. 8. Work pause can be ********* as the ********* fluid is clean, which can ********* the ********* ********* *********. 9. Can be used for *********, zero *********, no cost for ********* *********, ********* *********. 处理前示意图(上图)********* ********* ********* ********* (above) . 处理前后取样示意图(上图) ********* ********* after ********* (above) 设备参数： 处理量：*通流量 800L/H 存渣空间 0.7L 工作条件 适用温度 10-40℃ PH值 6-9 电源要求 电压 220V 频率 50Hz 电流 10A 电源总功率 1.3KW 转速********* 噪音 65dB(A) 设备重量 ********* 净重（包括台架） 135Kg 设备尺寸 长х宽х高 790х600х********* ********* ********* ********* *********：********* flow is 1000L/H ********* space: 0.7L ********* ********* ********* *********: 10-40℃ PH value: 6-9 Power ********* *********: 220V *********: 50/60Hz *********: 10A Total power: 1.3KW ********* speed: ********* Noise: 65dB (A) ********* ********* ********* Net ********* (********* frame): 135Kg Size: 790(L) х 600(W) х 1340(H)mm 综述：此产品占地面积小，能耗低，无耗材，综合效益高。
In *********, this ********* has a small *********, lower ********* *********, no *********, and ********* ********* *********. 简易移动式液槽清理机使用标准压力为80PSI的压缩空气时, 只需2分钟内就能装满/或清空55加仑 (210升左右) 的桶。
东莞市横沥金丰环保机械厂
